Anunţ

Caută printre mesajele de pe forum înainte de a scrie unul nou!
Formulează corect întrebarea sau problema pe care o ai.
Respectă regulile forumului și Codul de Conduită!

#1 22 Jul 2006 03:11:12

costy
Membru nou
Înregistrat: 09 Dec 2005
Mesaje: 15

scanner MUSTEK BEARPAW 1200 CU PLUS

am cumparat scanner MUSTEK BEARPAW 1200 CU PLUS care merge pe USB si nu reusesc sa-l fac sa mearga.

la comanda lsusb apare
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 055f:021b Mustek Systems, Inc.
Bus 001 Device 001: ID 0000:0000

iar la comanda sane-find-scanner -v am
This is sane-find-scanner from sane-backends 1.0.16-cvs

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating system.
  # If using Linux, try "modprobe sg".

searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
libusb not available
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a driver for your USB host controller and have installed a
  # kernel scanner module.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
done

Imi puteti da o mana de ajutor?

Offline

 

#2 19 Aug 2006 10:27:37

fp
Membru
Înregistrat: 19 Aug 2006
Mesaje: 32

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Instaleaza suport pentru sane:
$ sudo apt-get install libsane

Schimba la directorul pentru sane backend:
$ cd /usr/share/sane/gt68xx

Descarca firmware-ul:
$ sudo wget http://www.meier-geinitz.de/sane/gt68xx … PS1Gfw.usb

Offline

 

#3 19 Aug 2006 16:23:02

shapk
Membru nou
Înregistrat: 18 Aug 2006
Mesaje: 6

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Dupa ce instalezi firmware-ul tre sa mearga. Eu am un Mustek Be@rPaw 2448TA Plus si acesta ca si modelul tau necesita instalarea de firmware. Firmware-ul il gasesti si pe CD-ul cu drivere al scannerului.


Intrati in legalitate!!!
Folositi Linux!!!
http://www.ubuntu.ro/

Offline

 

#4 20 Aug 2006 12:24:03

ThunderM
Membru
Locaţie: Bucuresti
Înregistrat: 18 Jun 2006
Mesaje: 460

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Pacat ca nu exista si un backend pentru MUSTEK BearPaw 4800TA Pro II. Momentan nu pot sa-l folosesc pentru altceva decat pentru a-mi incalzi sandwitch-urile lol


All experiments should be reproductible . They should always fail in the same way...

Offline

 

#5 27 Nov 2006 10:34:49

costy
Membru nou
Înregistrat: 09 Dec 2005
Mesaje: 15

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

A mers, merci mult. Dar a mers dupa ce am cumparat calculator nou, pe cel vechi nu a vrut.

Offline

 

#6 11 Apr 2010 12:12:56

liviu9
Membru nou
Înregistrat: 05 Apr 2010
Mesaje: 6

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Postez aici toate intrebarile mele intrucat in momentul asta vreau sa instalez scanner-ul
Se dau urmatoarele:
- Incepator in linux : am instalat multe distributii insa la toate ma blochez la aceeasi problema: sane imi gaseste tvtuner-ul in loc de scanner.
- Ubuntu 9.10 : Dupa 11 ani de service/install Windows vreau sa folosesc Linux si m-am oprit la Ubuntu deoarece are in repository majoritatea aplicatiilor pe care le folosesc deocamdata (chiar daca am folosit  mai mult Suse: cca 1 an)
- Scanner Mustek 1200F usb
- TV Tuner: card=78 tuner=5

1. Am reusit sa instalez TV Tuner-ul conform indicatiilor de pe forum
2. Am citit pe forum ca TV Tunerele se bat cap in cap cu WebCam-urile : E valabil si pentru scannere?Nu am incercat cu tvtuner-ul scos deoarece lucrez mai mult cu el decat cu scaner-ul; deocamdata pentru scanner inca mai tin un windows instalat.
3. Am descarcat PS1Gfw.usb insa nu stiu si nu am gasit cu gogu' cum se instaleaza...

Rezultatele comenzilor despre care am citit mai sus:

liviu@liviu-desktop:~$ SANE_DEBUG_MA1509=255 scanimage -L
[sanei_debug] Setting debug level of ma1509 to 255.
[ma1509] SANE ma1509 backend version 1.0 build 3 from sane-backends 1.0.20
[ma1509] sane_init: authorize != null
[ma1509] sane_init: reading config file `ma1509.conf'
[ma1509] sane_init: config file line 1: ignoring comment line
[ma1509] sane_init: config file line 2: ignoring empty line
[ma1509] sane_init: config file line 3: ignoring comment line
[ma1509] sane_init: config file line 4: warmup-time set to 30 seconds
[ma1509] sane_init: config file line 5: ignoring empty line
[ma1509] sane_init: config file line 6: ignoring comment line
[ma1509] sane_init: config file line 7: trying to attach `usb 0x055f 0x0010'
[ma1509] attach: trying device libusb:003:003
[ma1509] attach: sending TEST_UNIT_READY
[ma1509] ma1509_cmd: fd=0, cmd=0x56ef1c, data=0xbf90d0cc, data_size=4
[ma1509] ma1509_cmd: cmd = 03 01 01 00 00 00 04 00
[ma1509] ma1509_cmd: sanei_usb_write_bulk returned Error during device I/O (size = 0, expected 8)
[ma1509] test_unit_ready: ma1509_cmd failed: Error during device I/O
[ma1509] attach: test_unit_ready device libusb:003:003 failed (Error during device I/O)
[ma1509] sane_init: config file line 8: ignoring empty line
[ma1509] sane_init: config file line 9: ignoring comment line
[ma1509] sane_init: config file line 10: ignoring comment line
[ma1509] sane_get_devices: 0 devices
[ma1509] sane_get_devices: end
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video0' is a Noname BT878 video (Jetway TV/Capture  virtual device
[ma1509] sane_exit
liviu@liviu-desktop:~$ sane-find-scanner -v am
This is sane-find-scanner from sane-backends 1.0.20

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking am... failed to open (Invalid argument)
  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

searching for USB scanners:
ignored am (not a USB device)
ignoring libusb devices
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.
done


P.S. am gasit cum se instaleaza PS1Gfw.usb insa scanner-ul meu nu apare pe acolo ...sau nu vad eu bine...

Editat ultima oară de liviu9 (11 Apr 2010 12:45:55)

Offline

 

#7 11 Apr 2010 12:23:33

marianvasile
Administrator
Locaţie: Bucuresti
Înregistrat: 15 Jan 2008
Mesaje: 3958

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

nu am experiență cu scanerele, dar o linie mi-a atras atenția: este posibil să fie nevoie de rularea acestui program cu drepturi de administrator pentru a găsi toate dispozitivele. odată identificate, ajustați permisiunile după nevoie (You may want to run this program as root to find all devices. Once you found the scanner devices, be sure to adjust access permissions as necessary).
încearcă așadar ultima comandă cu drepturi de administrator (sudo).


Tot ceea ce mâinile tale prind să săvârșească, fă cu hotărâre, pentru că în groapa în care te vei duce nu există nici faptă, nici punere la cale, nici știință și nici înțelepciune. (Ec. 9:10)

Offline

 

#8 11 Apr 2010 12:48:41

liviu9
Membru nou
Înregistrat: 05 Apr 2010
Mesaje: 6

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

am vazut linia aia insa am incercat in suse ca root si tot nu a mers; o singura data am reusit sa-l fac sa mearga in suse ,dar nu imi mai aduc aminte cum  si atunci nu mai mergea decat scanner-ul ,in rest linux-ul bushit cam 50%.

Incercat ca root:

root@liviu-desktop:/home/liviu# SANE_DEBUG_MA1509=255 scanimage -L
[sanei_debug] Setting debug level of ma1509 to 255.
[ma1509] SANE ma1509 backend version 1.0 build 3 from sane-backends 1.0.20
[ma1509] sane_init: authorize != null
[ma1509] sane_init: reading config file `ma1509.conf'
[ma1509] sane_init: config file line 1: ignoring comment line
[ma1509] sane_init: config file line 2: ignoring empty line
[ma1509] sane_init: config file line 3: ignoring comment line
[ma1509] sane_init: config file line 4: warmup-time set to 30 seconds
[ma1509] sane_init: config file line 5: ignoring empty line
[ma1509] sane_init: config file line 6: ignoring comment line
[ma1509] sane_init: config file line 7: trying to attach `usb 0x055f 0x0010'
[ma1509] attach: trying device libusb:003:003
[ma1509] attach: sending TEST_UNIT_READY
[ma1509] ma1509_cmd: fd=0, cmd=0x96af1c, data=0xbfb07ffc, data_size=4
[ma1509] ma1509_cmd: cmd = 03 01 01 00 00 00 04 00
[ma1509] ma1509_cmd: sanei_usb_write_bulk returned Error during device I/O (size = 0, expected 8)
[ma1509] test_unit_ready: ma1509_cmd failed: Error during device I/O
[ma1509] attach: test_unit_ready device libusb:003:003 failed (Error during device I/O)
[ma1509] sane_init: config file line 8: ignoring empty line
[ma1509] sane_init: config file line 9: ignoring comment line
[ma1509] sane_init: config file line 10: ignoring comment line
[ma1509] sane_get_devices: 0 devices
[ma1509] sane_get_devices: end
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video0' is a Noname BT878 video (Jetway TV/Capture  virtual device
[ma1509] sane_exit
root@liviu-desktop:/home/liviu# sane-find-scanner -v am
This is sane-find-scanner from sane-backends 1.0.20

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking am... failed to open (Invalid argument)
  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

searching for USB scanners:
ignored am (not a USB device)
ignoring libusb devices
  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
done

Am mai obtinut asta :

liviu@liviu-desktop:~$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x055f, product=0x0010) at libusb:003:002


Am rezolvat  credeam ca doar in Windows merge smecheria cu mutat pe alt port HI;dupa ce am scos la imprimanta si am citit fiecare litera din tot ce am gasit cu gogu' despre "ma1509"
Pentru cei care vor intampina probleme asemanatoare:

http://www.sane-project.org/man/sane-mustek_usb.5.html  - sectiunea "ENVIRONMENT"

am mutat scanner-ul pe alt port si am obtinut :
...device `ma1509:libusb:004:002' is a Mustek BearPaw 1200F flatbed scanner
initial am editat si fisierul ma1509.conf in sensul ca am sters "#" din fata liniilor care mi s-au parut ca ar contine setari (stiam "#"  duce la ignorarea liniei din spatele lui)

Acum merge perfect.
OFFTOPIC: am bagat juma de pachet de tigari in 4 ore... sa nu faceti ca mine...

Si totusi cand bag tvtuner-ul imi intra peste scanner ... mai sap ...

Editat ultima oară de liviu9 (11 Apr 2010 16:15:54)

Offline

 

#9 11 Apr 2010 17:04:40

liviu9
Membru nou
Înregistrat: 05 Apr 2010
Mesaje: 6

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Deci ramane intrebarea: a reusit cineva cu tvtuner si scanner ? la mine daca scot tv-tuner-ul merge scanner-ul ,daca il bag mi-l inlocuieste ca device ...

Offline

 

#10 11 Apr 2010 20:15:48

vladi
Oaspete

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Si nu poti modifica in preferintele programului de scanat?
Asa imi aparea si mie in gscan2pdf dar ma lasa sa modific.
Cauta pe forum ca am explicat cum se instaleaza programul ala. Poate te ajuta.

 

#11 14 Apr 2010 23:45:15

liviu9
Membru nou
Înregistrat: 05 Apr 2010
Mesaje: 6

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Multumesc pentru ajutor pana la urma am gasit rezolvarea pe pagina indicata de nlk_1:

"Edit "/usr/local/etc/gt68xx.conf" (or wherever you have installed it). At the beginning of that file, there is a commented out "usb vendor product" line. Remove the comment character and exchange "vendor" and "product" by the vendor and product ids you got from sane-find-scanner."

Dupa ce am facut asta mi-a dat voie sa-mi aleg scanner-ul si se pare ca merge;

Cu A2Nfw.usb nu merge : mi-l pune in lista ,insa nu functioneaza si acum tre sa vad cum il scot ; din cate am vazut este chip ma1509 (am si desfacut mai demult scanner-ul sa ma uit pe placa)

liviu@liviu-desktop:~$ SANE_DEBUG_MA1509=255 scanimage -L
[sanei_debug] Setting debug level of ma1509 to 255.
[ma1509] SANE ma1509 backend version 1.0 build 3 from sane-backends 1.0.20
[ma1509] sane_init: authorize != null
[ma1509] sane_init: reading config file `ma1509.conf'
[ma1509] sane_init: config file line 1: ignoring comment line
[ma1509] sane_init: config file line 2: ignoring empty line
[ma1509] sane_init: config file line 3: ignoring comment line
[ma1509] sane_init: config file line 4: warmup-time set to 30 seconds
[ma1509] sane_init: config file line 5: ignoring empty line
[ma1509] sane_init: config file line 6: ignoring comment line
[ma1509] sane_init: config file line 7: trying to attach `usb 0x055f 0x0010'
[ma1509] attach: trying device libusb:004:002
[ma1509] attach: sending TEST_UNIT_READY
[ma1509] ma1509_cmd: fd=0, cmd=0xc1ff1c, data=0xbfc9dbec, data_size=4
[ma1509] ma1509_cmd: cmd = 03 01 01 00 00 00 04 00
[ma1509] ma1509_cmd: trying to receive 4 bytes of data
[ma1509] ma1509_cmd: read 4 bytes, 0 bytes to go
[ma1509] buffer:  84 00 00 00
[ma1509] ma1509_cmd: finished: data_size=4, status=Success
[ma1509] attach: sending INQUIRY
[ma1509] ma1509_cmd: fd=0, cmd=0xc1ff24, data=0xbfca0fc9, data_size=96
[ma1509] ma1509_cmd: cmd = 12 01 00 00 00 00 60 00
[ma1509] ma1509_cmd: trying to receive 96 bytes of data
[ma1509] ma1509_cmd: read 96 bytes, 0 bytes to go
[ma1509] buffer:  06 00 01 01 5b 01 00 00 53 43 41 4e 4e 45 52 20
[ma1509] buffer:  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
[ma1509] buffer:  31 2e 30 36 4d 55 53 54 45 4b 20 20 20 42 30 36
[ma1509] buffer:  20 55 31 32 4b 46 57 4d 31 32 33 37 39 38 00 40
[ma1509] buffer:  00 c1 01 01 00 00 00 00 00 00 00 00 00 00 00 00
[ma1509] buffer:  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
[ma1509] ma1509_cmd: finished: data_size=96, status=Success
[ma1509] attach: inquiry output:
[ma1509]  06 00 01 01 5b 01 00 00 53 43 41 4e 4e 45 52 20  ....[...SCANNER
[ma1509]  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20                 
[ma1509]  31 2e 30 36 4d 55 53 54 45 4b 20 20 20 42 30 36  1.06MUSTEK   B06
[ma1509]  20 55 31 32 4b 46 57 4d 31 32 33 37 39 38 00 40   U12KFWM123798.@
[ma1509]  00 c1 01 01 00 00 00 00 00 00 00 00 00 00 00 00  ................
[ma1509]  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff  ................
[ma1509] attach: firmware revision 1.06
[ma1509] attach: scanner id:  B06 U12KFW
[ma1509] attach: found Mustek BearPaw 1200F flatbed scanner
[ma1509] sane_init: config file line 8: ignoring empty line
[ma1509] sane_init: config file line 9: ignoring comment line
[ma1509] sane_init: config file line 10: trying to attach `/dev/uscanner0'
[ma1509] attach: trying device /dev/uscanner0
[ma1509] attach: sanei_usb_open failed: Invalid argument
[ma1509] sane_get_devices: 1 devices
[ma1509] sane_get_devices: end
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video0' is a Noname BT878 video ( *** UNKNOWN/GENER virtual device
device `ma1509:libusb:004:002' is a Mustek BearPaw 1200F flatbed scanner
device `gt68xx:libusb:004:002' is a unknown manufacturer unknown device -- use override to select flatbed scanner
[ma1509] sane_exit

Offline

 

#12 15 Apr 2010 14:35:56

AM@OR
Membru
Locaţie: Baia Mare
Înregistrat: 21 Feb 2006
Mesaje: 676

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

@liviu9
Pe saitul dat de @nik_1 am gasit pentru BearPaw 1200 CU Plus (055f:021b)
firmwareul PS1Gfw.usb : http://www.meier-geinitz.de/sane/gt68xx … PS1Gfw.usb.

De asemenea mai are o mentiune cu link :

The Mustek BearPaw 1200 and BearPaw 2400 are supported by ..Gerhard Jaeger's Plustek backend.  .

B.r.

Offline

 

#13 15 Apr 2010 18:48:00

liviu9
Membru nou
Înregistrat: 05 Apr 2010
Mesaje: 6

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Din cate am vazut eu Mustek 1200F e diferit fata de toate celelalte Mustek-uri .Practic setarile pt el se fac doar in ma1509.conf  (product ,vendor , etc) si merge foarte bine fara sa instalez firmware.
Problema apare cum am mai spus doar in momentul in care instalez un tuner TV ,pur si simplu sane da eroare de I/O si nu mai am ce-i face; Aseara cand credeam ca l-am rezolvat am constatat ca de fapt nu instalasem tuner-ul; cand am instalat tunerul am ajuns in aceeasi pozitie.
Din fericire voi putea renunta la tuner intrucat mai am disponibil un PC si il voi muta acolo.

Offline

 

#14 16 Apr 2010 09:32:49

AM@OR
Membru
Locaţie: Baia Mare
Înregistrat: 21 Feb 2006
Mesaje: 676

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

@liviu

un post bogat despre instalarea TV-tuner bazat pe bt878 gasesti aici:
http://forum.ubuntu.ro/viewtopic.php?id=1306
Poate dupa ce-l instalezi nu-ti va mai face probleme.
B.r.

Offline

 

#15 17 Apr 2010 10:51:30

liviu9
Membru nou
Înregistrat: 05 Apr 2010
Mesaje: 6

Re: scanner MUSTEK BEARPAW 1200 CU PLUS

Cu tot respectul cred ca nu m-am facut inteles; am citit 99% din postarile referitoare la problema mea si de asemenea cam tot ce a gasit gogu despre ma1509 si Jetway (Kworld) bt878.Practic functionarea scanner-ului este conditionata de "dezinstalarea TVTuner-ului" ,chiar daca nu am gasit nicaieri combinatia asta.

Le-am instalat pe amandoua (TvTuner si Scanner) cu ajutorul informatiilor de pe forum si functioneaza perfect atata timp cat le conectez pe rand ,adica daca vreau sa folosesc scanner-ul trebuie sa scot placa TvTuner din PC .
Deci nu mai am probleme cu instalarea; ma deranjeaza doar faptul ca in momentul in care configurez tunerul pentru utilizare ,sistemul nu mai poate atasa portul usb pentru scanner desi ma1509.conf si gt68xx.conf raman configurate corect (zic eu):

"device `v4l:/dev/video0' is a Noname BT878 video ( *** UNKNOWN/GENER virtual device
device `ma1509:libusb:004:002' is a Mustek BearPaw 1200F flatbed scanner
device `gt68xx:libusb:004:002' is a unknown manufacturer unknown device -- use override to select flatbed scanner"

Deci cata vreme BT878 ramane "noname...unknown..." pot folosi scanner-ul Mustek1200F ,insa in momentul in care BT878 devine JetWay (Kworld)... ,adica poate fi utilizat, imi spune "failed" cand incearca sa ataseze portul usb necesar scanner-ului.
Linia cu gt68xx... ramasese de la alte incercari de configurare si nu cred ca mai conteaza intrucat am constatat ca e suficient sa configurez doar ma1509.conf pentru functionarea scanner-ului .

Oricum cred ca voi muta TvTunerul pe un alt PC (care va avea tot Ubuntu insa nu va avea scanner).

Multumesc pentru ajutor:
Liviu

Editat ultima oară de liviu9 (17 Apr 2010 11:04:33)

Offline

 
Feed

Antet forum

Powered by FluxBB