Anunţ

Caută printre mesajele de pe forum înainte de a scrie unul nou!
Formulează corect întrebarea sau problema pe care o ai.
Respectă regulile forumului și Codul de Conduită!

#1 08 Sep 2008 18:55:10

livram79
Membru nou
Înregistrat: 08 Sep 2008
Mesaje: 7

nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Sunt incepator in utilizarea linux-ului. Nu am gasit nici o varianta de linux care sa imi recunoasca placa de sunet. Vreau sa folosesc KUBUNTU 8.04. Pare ca are un driver ptr placa mea de sunet dar nu cred ca este bun. Va rog sa ma ajutati si pe mine. Multumesc oricui incearca sa ma ajute! Sunt in Timisoara, asta in cazul in care e cineva de aici.

Offline

 

#2 08 Sep 2008 19:52:46

DoruHush
Membru
Locaţie: Alexandria
Înregistrat: 17 Jun 2006
Mesaje: 2165

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

@livram79

          Nu ai furnizat absolut nici o informație utilă pentru a formula un răspuns.
          Citește pe forum înainte de a posta.
          Nu ai specificat ce anume ai făcut pentru a rezolva problema și rezultatele
obținute (rulare in terminal, mesaje de eroare sau de sistem primite, etc.).
          Nu ai specificat cum ai ajuns la concluzia că nu este recunoscut driverul
pentru placa de sunet.
          Pe forum sunt foarte multe discuții despre compilarea și instalarea manuală
a driverelor audio, trebuie citite, înțelese, adaptate la situația ta și aplicate.
Nu trebuie să existe un post special pentru placa ta audio pentru a aplica modul de lucru
pentru compilarea și instalarea manuală a driverului, decât în cazuri extrem de rare.

Cod:

man dmesg
man lspci

Offline

 

#3 09 Sep 2008 13:50:12

danny_b85
Membru
Locaţie: Bucuresti
Înregistrat: 05 Jun 2008
Mesaje: 783

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Asus K8U-X foloseste AD1888 ca si chipset audio, care este suportat de kernel-ul de Linux din 2005. Deci nu cred ca ar trebui sa fie probleme daca incerci Kubuntu 8.04.


"The universe is vast and we are so small. There is only one thing we can ever truly control. What's that? Whether we are good or evil"
"Knowledge is power, but how you use that power defines whether you are good, or evil."


RHCE

Offline

 

#4 09 Sep 2008 20:01:35

livram79
Membru nou
Înregistrat: 08 Sep 2008
Mesaje: 7

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

multumesc pentru raspunsuri. Iata de unde stiu ca nu-mi recunoaste placa de sunet: in dreapta jos, pe iconita pentru sunet este o bulina rosie cu un X alb pe ea. Daca dau clic pe ea imi spune MIXER CANNOT BE FOUND. La comanda:

Cod:

dd if=/dev/urandom of=/dev/sda bs=512 count=1

primesc raspunsul:

Cod:

1+0 records in
1+0 records out
512 bytes (512 B) copied, 0.000222117 s, 2.3 MB/s

Ce sa fac mai departe?

Editat ultima oară de livram79 (09 Sep 2008 20:25:22)

Offline

 

#5 09 Sep 2008 20:23:33

livram79
Membru nou
Înregistrat: 08 Sep 2008
Mesaje: 7

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Am citit intr-o alta discutie despre comanda

Cod:

asoundconf list

si primesc urmatorul raspuns la ea

Cod:

Names of available sound cards:
liviu@liviu:~$

deci nu-mi da nici un nume.

Offline

 

#6 09 Sep 2008 23:05:46

danny_b85
Membru
Locaţie: Bucuresti
Înregistrat: 05 Jun 2008
Mesaje: 783

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Holy shit, spune-mi ca nu ai executat ce am pus eu la SEMNATURA!!!

Sper ca nu tineai foarte mult la hard disk-ul ala, pentru ca s-a cam dus draq. Daca ai ceva important pe hard, nu da restart la calculator, lasa-l pornit, scoate tot ce e important de pe disk-ul care este vazut de sistem ca sda, eventual daca ai cum sa copiezi pe un sdb sau pe un alt disk, daca nu pe cd-uri si/sau dvd-uri.

Aveai ceva important pe disk?


"The universe is vast and we are so small. There is only one thing we can ever truly control. What's that? Whether we are good or evil"
"Knowledge is power, but how you use that power defines whether you are good, or evil."


RHCE

Offline

 

#7 10 Sep 2008 16:40:58

livram79
Membru nou
Înregistrat: 08 Sep 2008
Mesaje: 7

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Mersi mult Danny_b85 pentru disponibilitate! Oricum trebuia sa reinstalez Windows-ul! Dar de curiozitate, la ce SEMNATURA te-ai referit anterior? Scuze, dar sunt incepator! Vreau sa stiu ca sa nu repet greseala.
Te mai rog, daca nu iti cer prea mult, cum pot instala un driver ptr sunet? Dar pas cu pas ca si ptr un incepator. Am urmatorul driver: alsa-driver-0.9.1adi l-am luat de pe Driverguide.com
In read me file scrie

Cod:

Instructions for Installing the ALSA Driver


1. Copy the distribution zip file to the target machine. This zip file
is password protected. The password is in the notification email.

2. Unzip the distribution zip. It will ask you for the password.

    unzip <distribution-file-name>

3. You should have the ALSA driver tar file and this document. 
Untar the ALSA files with the command:

    tar xvzf alsa-driver-0.9.1ADI.tgz

4. You should have a directory called alsa-driver-0.9.1adi. CD to 
that directory and follow the standard ALSA build instructions in 
the file INSTALL.

    cd alsa-driver-0.9.1adi

5. To read the INSTALL file type:

    more INSTALL

6. The three basic commands needed to build the AC97 ALSA driver 
are summarize here:  (These commands should be executed from the 
root account.)

    ./configure --with-cards=intel8x0
    make install
    ./snddevices

7. Edit /etc/modules.conf and add the following lines:

# ALSA native device support
alias char-major-116 snd
options snd major=116 cards_limit=1
alias snd-card-0 snd-intel8x0

# OSS/Free setup
alias char-major-14 soundcore
alias sound-slot-0 snd-intel8x0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :

9. Reboot your system.

10. Please read the ALSA INSTALL file for more information.

Nu inteleg de la punctul 7 Edit/etc/modules.conf
Cum pot face asta?

Editat ultima oară de livram79 (10 Sep 2008 17:02:48)

Offline

 

#8 17 Sep 2008 17:01:04

livram79
Membru nou
Înregistrat: 08 Sep 2008
Mesaje: 7

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Din cate inteleg e problema de configurare. Am verificat la sound si imi spune ca sound card is not configured. Am un live CD cu Linspire five-o si acesta imi recunoaste placa de sunet. M-am uitat la detalii la sunet si este scris asta:

Cod:

Sound driver: 3.8.1a-980706 (ALSAv 1.0.8 emulation)
Installed drivers:
Type 10: ALSA emulation
Card config: ALi M5455 with AD 1888 at 0x0, irq 5

Puteti careva sa ma ajutati explicandu-mi cum sa configurez placa de sunet? Multumesc din nou oricui imi ofera explicatii si mentionez ca sunt incepator.

Offline

 

#9 18 Sep 2008 04:14:47

mkhlnsh
Membru
Locaţie: Galați, România
Înregistrat: 28 Mar 2008
Mesaje: 163
Site web

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

livram79, comanda dd if=/dev/nu știu ce, care a avut efectul de a-ți sterge hardislul, era pe post de semnătură, adică era adăugată automat la toate mesajele scrise de danny_b85. Nu a fost cu intenție, nimeni nu s-a gândit vreodată că cineva va urma un astfel de „sfat”. Deși înțeleg gravitatea situației, la fel ca toți ceilalți, inclusiv danny_b85, trebuie să recunosc ca eu m-am amuzat copios. Presupun că danny_b85 și-a editat semnătura și de asta acum nu se mai vede.

Placa ta de sunet ar trebui să funcționeze fără probleme. Înainte de a mai încerca să urmezi orice alt sfat, te sfătuiesc să încerci să citești cu atenție și să faci tot posibilul să înțelegi ceea ce citești.

Comanda

Cod:

lspci

ce spune?


„Dacă nu-i stricat, freacă-l până crapă.”

Offline

 

#10 18 Sep 2008 07:42:38

livram79
Membru nou
Înregistrat: 08 Sep 2008
Mesaje: 7

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

comanda lspci da urmatorul raspuns:

Cod:

00:00.0 Host bridge: ALi Corporation M1689 K8 Northbridge [Super K8 Single Chip]
00:01.0 PCI bridge: ALi Corporation AGP8X Controller
00:02.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:03.0 ISA bridge: ALi Corporation M1563 HyperTransport South Bridge (rev 70)
00:03.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:04.0 Multimedia audio controller: ALi Corporation M5455 PCI AC-Link Controller Audio Device (rev 20)
00:0d.0 Ethernet controller: ALi Corporation ULi 1689,1573 integrated ethernet. (rev 40)
00:0e.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
00:0e.1 Mass storage controller: ALi Corporation ULi 5289 SATA (rev 10)
00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0f.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

presupun ca ALI M5455 este driverul responsabil de sunet. Am urmat deja pasii de la Sound Troubleshooting de pe site-ul Ubuntu si cand am ajuns la sudo dpkg-reconfigure alsa-source nu apare nici un Ali M5455, exista doar Ali 5451. Placa mea de sunet este AD1888 integrata in placa de baza ASUS K8U-X, Multumesc pentru disponibilitatea de a ma ajuta! Astept raspuns de la tine.

Editat ultima oară de livram79 (18 Sep 2008 20:31:16)

Offline

 

#11 19 Sep 2008 00:15:26

mkhlnsh
Membru
Locaţie: Galați, România
Înregistrat: 28 Mar 2008
Mesaje: 163
Site web

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Citește și asta și zi-mi ce zice și comanda:

Cod:

dmesg

Editat ultima oară de mkhlnsh (19 Sep 2008 00:16:27)


„Dacă nu-i stricat, freacă-l până crapă.”

Offline

 

#12 19 Sep 2008 09:02:44

livram79
Membru nou
Înregistrat: 08 Sep 2008
Mesaje: 7

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

raspuns la comanda dmesg

Cod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
[    0.000000]  BIOS-e820: 000000001ffd0000 - 000000001ffdf000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001ffdf000 - 0000000020000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000ff780
[    0.000000] Entering add_active_range(0, 0, 131024) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131024
[    0.000000]   HighMem    131024 ->   131024
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131024
[    0.000000] On node 0 totalpages: 131024
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125937 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FA7F0 checksum 0
[    0.000000] ACPI: RSDP 000FA7F0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 1FFD0000, 0030 (r1 A M I  OEMRSDT  12000505 MSFT       97)
[    0.000000] ACPI: FACP 1FFD0200, 0081 (r1 A M I  OEMFACP  12000505 MSFT       97)
[    0.000000] ACPI: DSDT 1FFD03F0, 3F45 (r1  A0158 A0158000        0 INTL  2002026)
[    0.000000] ACPI: FACS 1FFDF000, 0040
[    0.000000] ACPI: APIC 1FFD0390, 0054 (r1 A M I  OEMAPIC  12000505 MSFT       97)
[    0.000000] ACPI: OEMB 1FFDF040, 0040 (r1 A M I  AMI_OEM  12000505 MSFT       97)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:12 APIC version 16
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df780000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130001
[    0.000000] Kernel command line: root=UUID=3574ed89-fc57-4c80-93dd-fdf3370c6379 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1599.956 MHz processor.
[   20.083152] Console: colour VGA+ 80x25
[   20.083155] console [tty0] enabled
[   20.083361] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   20.083753] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   20.093925] Memory: 506880k/524096k available (2177k kernel code, 16608k reserved, 1006k data, 368k init, 0k highmem)
[   20.093933] virtual kernel memory layout:
[   20.093935]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   20.093936]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   20.093937]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   20.093939]     lowmem  : 0xc0000000 - 0xdffd0000   ( 511 MB)
[   20.093940]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   20.093941]       .data : 0xc0320434 - 0xc041bdc4   (1006 kB)
[   20.093943]       .text : 0xc0100000 - 0xc0320434   (2177 kB)
[   20.093946] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   20.093978] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   20.173997] Calibrating delay using timer specific routine.. 3201.85 BogoMIPS (lpj=6403704)
[   20.174020] Security Framework initialized
[   20.174025] SELinux:  Disabled at boot.
[   20.174039] AppArmor: AppArmor initialized
[   20.174043] Failure registering capabilities with primary security module.
[   20.174051] Mount-cache hash table entries: 512
[   20.174154] Initializing cgroup subsys ns
[   20.174158] Initializing cgroup subsys cpuacct
[   20.174167] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[   20.174176] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   20.174179] CPU: L2 Cache: 128K (64 bytes/line)
[   20.174182] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
[   20.174191] Compat vDSO mapped to ffffe000.
[   20.174201] Checking 'hlt' instruction... OK.
[   20.190287] SMP alternatives: switching to UP code
[   20.191505] Freeing SMP alternatives: 11k freed
[   20.191629] Early unpacking initramfs... done
[   20.597312] ACPI: Core revision 20070126
[   20.597378] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   20.599289] CPU0: AMD Sempron(tm) Processor 2600+ stepping 02
[   20.599308] Total of 1 processors activated (3201.85 BogoMIPS).
[   20.599794] ENABLING IO-APIC IRQs
[   20.600030] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   20.746067] Brought up 1 CPUs
[   20.746115] CPU0 attaching sched-domain:
[   20.746118]  domain 0: span 01
[   20.746120]   groups: 01
[   20.746305] net_namespace: 64 bytes
[   20.746313] Booting paravirtualized kernel on bare hardware
[   20.746793] Time:  8:56:01  Date: 09/19/08
[   20.746820] NET: Registered protocol family 16
[   20.747007] EISA bus registered
[   20.747028] ACPI: bus type pci registered
[   20.747901] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[   20.747904] PCI: Using configuration type 1
[   20.747914] Setting up standard PCI resources
[   20.756101] ACPI: EC: Look up EC in DSDT
[   20.760464] ACPI: Interpreter enabled
[   20.760468] ACPI: (supports S0 S1 S3 S4 S5)
[   20.760482] ACPI: Using IOAPIC for interrupt routing
[   20.768846] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   20.769036] PCI quirk: region 0800-083f claimed by ali7101 ACPI
[   20.769480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   20.769584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   20.769653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
[   20.778236] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   20.778380] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   20.778518] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   20.778655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   20.778792] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   20.778929] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   20.779069] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   20.779206] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
[   20.779343] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   20.779470] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  09, should be FC [20070126]
[   20.779477] Linux Plug and Play Support v0.97 (c) Adam Belay
[   20.779507] pnp: PnP ACPI init
[   20.779518] ACPI: bus type pnp registered
[   20.785106] pnp: PnP ACPI: found 14 devices
[   20.785110] ACPI: ACPI bus type pnp unregistered
[   20.785114] PnPBIOS: Disabled by ACPI PNP
[   20.785334] PCI: Using ACPI for IRQ routing
[   20.785338] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   20.806033] NET: Registered protocol family 8
[   20.806036] NET: Registered protocol family 20
[   20.806107] AppArmor: AppArmor Filesystem Enabled
[   20.810025] Time: tsc clocksource has been installed.
[   20.818073] system 00:0a: ioport range 0xc00-0xc0f has been reserved
[   20.818077] system 00:0a: ioport range 0xd00-0xd0f has been reserved
[   20.818080] system 00:0a: ioport range 0xa20-0xa2f has been reserved
[   20.818083] system 00:0a: ioport range 0xa30-0xa3f has been reserved
[   20.818091] system 00:0b: ioport range 0x400-0x40f has been reserved
[   20.818094] system 00:0b: ioport range 0x480-0x48f has been reserved
[   20.818097] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[   20.818100] system 00:0b: ioport range 0x800-0x87f could not be reserved
[   20.818105] system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
[   20.818108] system 00:0b: iomem range 0xffb00000-0xffbbffff could not be reserved
[   20.818115] system 00:0c: iomem range 0xffbc0000-0xffbfffff could not be reserved
[   20.818119] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[   20.818122] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[   20.818129] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[   20.818132] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[   20.818135] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[   20.818139] system 00:0d: iomem range 0x100000-0x1fffffff could not be reserved
[   20.818142] system 00:0d: iomem range 0x0-0x0 could not be reserved
[   20.848546] PCI: Bridge: 0000:00:01.0
[   20.848549]   IO window: d000-dfff
[   20.848554]   MEM window: faf00000-fbffffff
[   20.848558]   PREFETCH window: f0000000-f9ffffff
[   20.848562] PCI: Bridge: 0000:00:02.0
[   20.848564]   IO window: e000-efff
[   20.848568]   MEM window: disabled.
[   20.848571]   PREFETCH window: disabled.
[   20.848582] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   20.848588] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   20.848602] NET: Registered protocol family 2
[   20.886108] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   20.886350] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   20.886457] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   20.886584] TCP: Hash tables configured (established 16384 bind 16384)
[   20.886587] TCP reno registered
[   20.898169] checking if image is initramfs... it is
[   21.350051] Switched to high resolution mode on CPU 0
[   21.686751] Freeing initrd memory: 7964k freed
[   21.687352] audit: initializing netlink socket (disabled)
[   21.687365] audit(1221814562.488:1): initialized
[   21.689272] VFS: Disk quotas dquot_6.5.1
[   21.689357] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   21.689501] io scheduler noop registered
[   21.689503] io scheduler anticipatory registered
[   21.689505] io scheduler deadline registered
[   21.689516] io scheduler cfq registered (default)
[   22.145927] Boot video device is 0000:01:00.0
[   22.146220] isapnp: Scanning for PnP cards...
[   22.499767] isapnp: No Plug & Play device found
[   22.532536] Real Time Clock Driver v1.12ac
[   22.532625] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   22.532737] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.533415] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.534204] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   22.534277] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   22.534380] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   22.536564] serio: i8042 KBD port at 0x60,0x64 irq 1
[   22.536569] serio: i8042 AUX port at 0x60,0x64 irq 12
[   22.538104] mice: PS/2 mouse device common for all mice
[   22.538228] EISA: Probing bus 0 at eisa.0
[   22.538263] EISA: Detected 0 cards.
[   22.538266] cpuidle: using governor ladder
[   22.538268] cpuidle: using governor menu
[   22.538358] NET: Registered protocol family 1
[   22.538386] Using IPI No-Shortcut mode
[   22.538415] registered taskstats version 1
[   22.538510]   Magic number: 8:184:928
[   22.538590]   hash matches device ptyxd
[   22.538648] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   22.538650] EDD information not available.
[   22.538951] Freeing unused kernel memory: 368k freed
[   22.565914] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   23.824680] fuse init (API version 7.9)
[   24.590310] SCSI subsystem initialized
[   24.661718] libata version 3.00 loaded.
[   24.673782] usbcore: registered new interface driver usbfs
[   24.673805] usbcore: registered new interface driver hub
[   24.687712] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 16
[   24.687758] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
[   24.701095] usbcore: registered new device driver usb
[   24.709767] sata_uli 0000:00:0e.1: version 1.3
[   24.709779] ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 19 (level, low) -> IRQ 16
[   24.719590] scsi0 : sata_uli
[   24.743268] scsi1 : sata_uli
[   24.743325] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc080 bmdma 0xb880 irq 16
[   24.743329] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 16
[   24.749752] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   24.858400] Floppy drive(s): fd0 is 1.44M
[   24.881585] FDC 0 is a post-1991 82077
[   25.209705] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   25.217973] ata1.00: ATA-7: SAMSUNG HD080HJ, ZH100-41, max UDMA7
[   25.217978] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   25.257978] ata1.00: configured for UDMA/133
[   25.569628] ata2: SATA link down (SStatus 0 SControl 310)
[   25.569762] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ  ZH10 PQ: 0 ANSI: 5
[   25.576201] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 17
[   25.576217] ohci_hcd 0000:00:0f.0: OHCI Host Controller
[   25.576459] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 1
[   25.576478] ohci_hcd 0000:00:0f.0: irq 17, io mem 0xfaef3000
[   25.577546] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   25.577552] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   25.585037] Driver 'sd' needs updating - please use bus_type methods
[   25.585122] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   25.585135] sd 0:0:0:0: [sda] Write Protect is off
[   25.585138] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   25.585155] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   25.585199] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   25.585209] sd 0:0:0:0: [sda] Write Protect is off
[   25.585212] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   25.585227] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   25.585231]  sda: sda1 sda2 sda3
[   25.609016] sd 0:0:0:0: [sda] Attached SCSI disk
[   25.614381] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   25.631788] usb usb1: configuration #1 chosen from 1 choice
[   25.631813] hub 1-0:1.0: USB hub found
[   25.631820] hub 1-0:1.0: 3 ports detected
[   25.733771] ACPI: PCI Interrupt 0000:00:0f.1[b] -> GSI 21 (level, low) -> IRQ 18
[   25.733785] ohci_hcd 0000:00:0f.1: OHCI Host Controller
[   25.733808] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 2
[   25.733824] ohci_hcd 0000:00:0f.1: irq 18, io mem 0xfaefc000
[   25.792582] usb usb2: configuration #1 chosen from 1 choice
[   25.792610] hub 2-0:1.0: USB hub found
[   25.792618] hub 2-0:1.0: 3 ports detected
[   25.893695] ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 22 (level, low) -> IRQ 19
[   25.893710] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[   25.893735] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 3
[   25.893755] ohci_hcd 0000:00:0f.2: irq 19, io mem 0xfaefd000
[   25.938165] Attempting manual resume
[   25.938170] swsusp: Resume From Partition 8:3
[   25.938172] PM: Checking swsusp image.
[   25.938395] PM: Resume from disk failed.
[   25.952815] usb usb3: configuration #1 chosen from 1 choice
[   25.952844] hub 3-0:1.0: USB hub found
[   25.952852] hub 3-0:1.0: 3 ports detected
[   25.977310] kjournald starting.  Commit interval 5 seconds
[   25.977324] EXT3-fs: mounted filesystem with ordered data mode.
[   26.053823] ACPI: PCI Interrupt 0000:00:0f.3[D] -> GSI 23 (level, low) -> IRQ 20
[   26.053837] ehci_hcd 0000:00:0f.3: EHCI Host Controller
[   26.053867] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 4
[   26.053893] ehci_hcd 0000:00:0f.3: debug port 1
[   26.053907] ehci_hcd 0000:00:0f.3: irq 20, io mem 0xfaefe800
[   26.065616] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.065737] usb usb4: configuration #1 chosen from 1 choice
[   26.065760] hub 4-0:1.0: USB hub found
[   26.065767] hub 4-0:1.0: 8 ports detected
[   26.169805] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc7) at  PCI slot 0000:00:0e.0
[   26.169818] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 16
[   26.169827] ALI15X3: not 100% native mode: will probe irqs later
[   26.169839] ALI15X3: simplex device: DMA forced
[   26.169845]     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
[   26.169857]     ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
[   26.169866] Probing IDE interface ide0...
[   27.241606] hda: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[   27.241642] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[   27.242685] hda: UDMA/33 mode selected
[   27.243230] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   27.246305] Probing IDE interface ide1...
[   32.769077] Linux agpgart interface v0.102
[   32.881051] agpgart: Unsupported ALi chipset (device id: 1689)
[   32.993716] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   33.041150] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   33.169241] agpgart: Detected AGP bridge 0
[   33.169256] Setting up ULi AGP.
[   33.177467] agpgart: AGP aperture is 256M @ 0xe0000000
[   33.245007] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[   33.245334] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21
[   33.297258] eth0: ULi M5263 at pci0000:00:0d.0, 00:15:f2:72:4f:87, irq 21.
[   33.681017] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS?
[   33.681022] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted.
[   33.729010] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400
[   33.797600] input: Power Button (FF) as /devices/virtual/input/input2
[   33.812956] ACPI: Power Button (FF) [PWRF]
[   33.813058] input: Power Button (CM) as /devices/virtual/input/input3
[   33.828934] ACPI: Power Button (CM) [PWRB]
[   33.913004] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
[   33.913011] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted.
[   34.009370] snd_intel8x0: disagrees about version of symbol snd_pcm_new
[   34.009377] snd_intel8x0: Unknown symbol snd_pcm_new
[   34.009428] snd_intel8x0: disagrees about version of symbol snd_pcm_limit_hw_rates
[   34.009431] snd_intel8x0: Unknown symbol snd_pcm_limit_hw_rates
[   34.009551] snd_intel8x0: disagrees about version of symbol snd_pcm_lib_preallocate_pages_for_all
[   34.009554] snd_intel8x0: Unknown symbol snd_pcm_lib_preallocate_pages_for_all
[   34.009999] snd_intel8x0: disagrees about version of symbol snd_ac97_pcm_double_rate_rules
[   34.010001] snd_intel8x0: Unknown symbol snd_ac97_pcm_double_rate_rules
[   34.010190] snd_intel8x0: disagrees about version of symbol snd_pcm_lib_malloc_pages
[   34.010193] snd_intel8x0: Unknown symbol snd_pcm_lib_malloc_pages
[   34.010230] snd_intel8x0: disagrees about version of symbol snd_pcm_lib_ioctl
[   34.010232] snd_intel8x0: Unknown symbol snd_pcm_lib_ioctl
[   34.010275] snd_intel8x0: disagrees about version of symbol snd_pcm_lib_free_pages
[   34.010277] snd_intel8x0: Unknown symbol snd_pcm_lib_free_pages
[   34.010332] snd_intel8x0: disagrees about version of symbol snd_pcm_set_ops
[   34.010334] snd_intel8x0: Unknown symbol snd_pcm_set_ops
[   34.010380] snd_intel8x0: disagrees about version of symbol snd_pcm_hw_constraint_list
[   34.010383] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_list
[   34.010542] snd_intel8x0: disagrees about version of symbol snd_pcm_suspend_all
[   34.010544] snd_intel8x0: Unknown symbol snd_pcm_suspend_all
[   34.010651] snd_intel8x0: disagrees about version of symbol snd_pcm_hw_constraint_integer
[   34.010654] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_integer
[   34.010740] snd_intel8x0: disagrees about version of symbol snd_pci_quirk_lookup
[   34.010742] snd_intel8x0: Unknown symbol snd_pci_quirk_lookup
[   34.010796] snd_intel8x0: disagrees about version of symbol snd_pcm_hw_constraint_msbits
[   34.010798] snd_intel8x0: Unknown symbol snd_pcm_hw_constraint_msbits
[   34.010871] snd_intel8x0: disagrees about version of symbol snd_pcm_period_elapsed
[   34.010874] snd_intel8x0: Unknown symbol snd_pcm_period_elapsed
[   34.635967] hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[   34.635977] Uniform CD-ROM driver Revision: 3.20
[   35.045202] nvidia: module license 'NVIDIA' taints kernel.
[   36.032907] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   36.750785] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 22
[   36.751069] NVRM: loading NVIDIA UNIX x86 Kernel Module  169.12  Thu Feb 14 17:53:07 PST 2008
[   37.213496] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   37.247725] parport_pc 00:09: reported by Plug and Play ACPI
[   37.247768] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   38.917870] lp0: using parport0 (interrupt-driven).
[   38.966302] Adding 265064k swap on /dev/sda3.  Priority:-1 extents:1 across:265064k
[   39.537076] EXT3 FS on sda2, internal journal
[   39.688831] device-mapper: uevent: version 1.0.3
[   39.688861] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   40.935508] ip_tables: (C) 2000-2006 Netfilter Core Team
[   41.324933] No dock devices found.
[   41.814746] powernow-k8: Power state transitions not supported
[   43.923455] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   43.923462] apm: overridden by ACPI.
[   44.111358] ppdev: user-space parallel port driver
[   44.579488] audit(1221803785.768:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4737 profile="/usr/sbin/cupsd" namespace="default"
[   44.836416] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[   44.836433] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[   44.836458] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[   47.043559] Bluetooth: Core ver 2.11
[   47.044194] NET: Registered protocol family 31
[   47.044199] Bluetooth: HCI device and connection manager initialized
[   47.044203] Bluetooth: HCI socket layer initialized
[   47.071847] Bluetooth: L2CAP ver 2.9
[   47.071853] Bluetooth: L2CAP socket layer initialized
[   47.137227] Bluetooth: RFCOMM socket layer initialized
[   47.137244] Bluetooth: RFCOMM TTY layer initialized
[   47.137247] Bluetooth: RFCOMM ver 1.8
[   49.935884] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[   52.231409] NET: Registered protocol family 17
[   55.163272] NET: Registered protocol family 10
[   55.163763] lo: Disabled Privacy Extensions
[   65.494251] eth0: no IPv6 routers present

Multumesc pentru disponibilitate!

Offline

 

#13 19 Sep 2008 19:00:15

mkhlnsh
Membru
Locaţie: Galați, România
Înregistrat: 28 Mar 2008
Mesaje: 163
Site web

Re: nerecunoasterea placii de sunet integrata in placa de baza ASUS K8U-X

Problema e la modulul snd-intel8x0. Cert e că încă nu se cunoaște rezolvarea. Am mai văzut și pe ubuntuforums un topic în care concluzia era aceeași. Se presupune că nucleul 2.6.27 din Ubuntu 8.10 rezolvă „și problema asta”. Nu știu ce să zic, problema e deasupra cunoștințelor mele.


„Dacă nu-i stricat, freacă-l până crapă.”

Offline

 
Feed

Antet forum

Powered by FluxBB